Get the electrical right before the plaster goes on
The decisions that matter on a renovation get made before anyone can see them. Where the lights land, how the switching works, whether the board can carry what you're adding. We'd rather spend an hour on that with you at the start than have you live with it afterwards.
Blue Mountains
From plans to handover
Lighting plans
We'll mark up your plans — what goes where, how it switches, and what it'll look like at night.
Full rough-in
All cabling run and secured before lining, set out so the fit-off lands where it should.
Kitchens and bathrooms
Appliance circuits, under-bench and splashback power, rangehood, heated towel rails and underfloor heating.
Switchboard to suit the load
A renovation usually adds load. We size and upgrade the board as part of the job, not as a surprise.
Data, TV and comms
Cat6, wall points and access point locations planned while the walls are open.
Smart switching
Clipsal Wiser wiring put in at rough-in, so the option is there whether you use it now or later.
Fit-off and testing
Fittings, switches and outlets installed, every circuit tested and labelled.
Certification
Certificate of Compliance and switchboard schedule issued at completion for your records or your certifier.
How it works
Plans or a site visit
Send through the plans, or we'll come and look at the space and talk through what you're planning.
Lighting plan and fixed quote
A marked-up plan and an itemised quote, so you can see the scope before committing.
Rough-in, on the builder's program
Booked around the other trades so we're not the reason the plasterer waits.
Fit-off, test, certify
Fittings on, everything tested, compliance documents issued at handover.
Want a price for your job?
Call for a quick answer, or send the form and we'll reply within one business day.
Common questions
Can't see yours? Call and ask — friendly advice is free.
When should I get the electrician involved?
Earlier than most people do — ideally when the plans are still being drawn. Lighting layouts and board capacity are cheap to change on paper and expensive to change in a wall.
Do you work with our builder?
Yes, that's standard for us. We coordinate rough-in and fit-off dates directly with the builder and keep you in the loop on anything that affects cost or finish.
Can you help with the lighting plan?
Yes, and it's included in the quote on renovation work. We'll mark up your plans and talk through the rooms you actually use at night.
What about older or heritage homes?
Common up here. Knob-and-tube, rubber-insulated cable and no earth are all things we find in Mountains houses — we'll tell you what has to be replaced and what can safely stay.
When does the switchboard need upgrading?
Usually when you add significant load (a new kitchen, heating, air conditioning) or when the existing board has no safety switches. We'll tell you at quote stage, not halfway through.
Get a free quote — Renovations
Tell us what you need and we'll come back to you within one business day. For urgent faults, call 0478 001 665.